Bruiser 16
Bruiser 16
The Bruiser 16 combines a rugged welded HDPE hull with center-console control, a rear bench seat, and the open deck space to work or fish hard. Built for guides, commercial users, and serious anglers, it delivers the durability of HDPE with the comfort and control of a traditional center-console boat.
Built Your Way
Welded HDPE
Heavy-duty 1/2-inch welded polyethylene construction built for impacts, saltwater, docks, rocky shorelines, and demanding everyday use.
Tiller Or Center Console
Choose the simplicity and open deck space of a tiller setup or the comfort and control of a traditional center-console configuration.
Self-Bailing Deck
A spacious non-skid deck gives anglers and crews room to move while helping direct water aft and overboard.
Serious Capability
A wide, stable 16-foot platform with substantial load capacity and power options matched to the way you plan to use the boat.
Specifications
Both Bruiser 16 configurations share the same rugged welded-HDPE hull, capacity, and self-bailing deck. Choose the helm and seating layout that best fits the way you fish, work, and run the boat.
Two Ways To Build A Bruiser
Choose the setup that fits the way you use the boat. Both configurations are currently available with $3,000 in launch savings.
Tiller
Simple, light, and wide open. The tiller Bruiser keeps the helm aft and preserves as much usable deck space as possible.
- Tiller-controlled outboard
- Side rear seating
- Maximum usable open deck space
- Simple, straightforward layout
Center Console
The center-console Bruiser adds wheel steering, a dedicated helm, and greater horsepower capability while retaining the same rugged hull.
- Center console with wheel steering
- Throttle controls at the helm
- Rear bench seating
- Traditional center-console driving position
Limited-time launch pricing. Offer and pricing may be changed or withdrawn at any time. Launch pricing is not guaranteed until a deposit is received. Prices shown are for the boat only. Outboard motor, trailer, EVA flooring, electronics, and other optional equipment are additional.
Build timing is an estimate and may vary based on configuration, options, material availability, and current production schedule.
Standard On Both
Real-World Performance
The Bruiser 16 has been developed and tested on the water, not just on paper. We've spent time evaluating handling, stability, deck layout, load response, and everyday usability to build a 16-foot platform that works whether you choose tiller steering or a center console. During testing with a 60 HP Tohatsu, the Bruiser platform reached approximately 30–32 mph.
Performance will vary based on configuration, engine, propeller, passenger and gear load, rigging, water conditions, and other factors. Test results are not a guaranteed speed for every Bruiser 16.
Built Tough Without The Fuss
Every Bruiser 16 starts with the same rugged welded HDPE hull, whether you choose the tiller or center-console configuration. High-density polyethylene handles impact, resists corrosion, and creates a boat designed to be used hard without constantly worrying about cosmetic damage.
Impact Tough
HDPE is highly impact resistant, making it well suited for docks, rocky shorelines, beaches, and demanding day-to-day use.
No Rot. No Rust.
Polyethylene doesn't rot, and the hull material itself won't rust or corrode in fresh or saltwater.
Low Maintenance
There is no gelcoat to wax and no painted hull finish that needs to be protected from scratches and routine wear.
Weldable & Repairable
Welded HDPE construction can be repaired and modified using specialized plastic-welding techniques when needed.
Make The Bruiser Yours
The Bruiser 16 gives you the same rugged welded-HDPE platform in two different layouts. Choose a tiller configuration for maximum simplicity and open deck space, or choose a center console for traditional steering and added driving comfort.
Tiller
Simple, functional, and wide open. The tiller configuration keeps the helm aft and leaves as much usable deck space as possible for fishing, gear, work, and easy movement around the boat.
Center Console
For owners who prefer wheel steering and a more traditional driving position, the center-console configuration adds comfort and control while retaining the Bruiser's open, practical layout.
Fishing & Guiding
A wide beam, open deck, built-in storage, and seating for up to five people create a versatile platform for serious anglers, guides, and outfitters.
Work & Utility
Heavy-duty welded construction and a straightforward deck layout also make the Bruiser a capable platform for commercial, municipal, fleet, and marine-service applications.
Questions & Answers
What is the Bruiser 16?
The Bruiser 16 is a 16-foot welded HDPE boat built around a wide, open, self-bailing platform for fishing, recreational use, guiding, and demanding work. It is available in both tiller and center-console configurations.
What is the difference between the tiller and center-console Bruiser?
Both configurations use the same Bruiser 16 hull. The tiller version keeps the helm aft, uses side rear seating, weighs approximately 975 pounds dry, and is rated for up to 60 HP. The center-console version adds wheel steering, a rear bench seat, weighs approximately 1,050 pounds dry, and is rated for up to 90 HP.
Which Bruiser configuration is right for me?
The tiller configuration is a strong choice if simplicity, lower weight, and maximum open deck space are your priorities. The center-console version is better suited to owners who prefer wheel steering, a dedicated helm, a rear bench seat, and higher horsepower capability.
How much does each Bruiser 16 configuration weigh?
Approximate dry weight is 975 pounds for the tiller configuration and 1,050 pounds for the center-console configuration. Final rigged weight will vary depending on the engine, batteries, fuel, options, and other equipment.
What is the maximum horsepower for the Bruiser 16?
The tiller configuration is rated for up to 60 HP. The center-console configuration is rated for up to 90 HP.
How does the seating differ between the two configurations?
The tiller configuration uses side rear seats, which helps preserve open space around the aft helm. The center-console configuration uses a rear bench seat along with the dedicated center-console layout.
How many people can the Bruiser 16 carry?
The Bruiser 16 is rated for up to five people, with a maximum persons capacity of 750 pounds. Maximum total capacity is 1,250 pounds.
What is the Bruiser 16 made from?
The Bruiser 16 is fabricated from 1/2-inch welded high-density polyethylene. HDPE is highly impact resistant, does not rot, and the hull material itself will not rust or corrode in fresh or saltwater.
Is the Bruiser 16 self-bailing?
Yes. The Bruiser 16 uses a self-bailing, non-skid deck designed to provide a practical working surface while directing water aft and overboard.
Does the Bruiser 16 have storage?
Yes. The Bruiser includes built-in storage as part of the boat's seating and deck layout. Storage arrangement varies somewhat between the tiller and center-console configurations.
Can the Bruiser 16 be used in saltwater?
Yes. The welded HDPE hull is well suited for both fresh and saltwater use because the hull material itself will not rust or corrode. Engines, steering components, hardware, and other equipment should still be maintained according to their manufacturers' recommendations.
Does the Bruiser 16 have flotation?
Yes. The Bruiser 16 incorporates flotation foam beneath the deck as part of the boat's construction.
What kind of fuel system does the Bruiser 16 use?
The Bruiser 16 is designed around a portable fuel tank rather than a permanently integrated fuel tank, keeping the system simple and accessible.
How long does it take to build a Bruiser 16?
Current estimated build time is approximately 16–20 weeks from deposit. Timing can vary based on configuration, selected options, material availability, and the current production schedule.
How do I get Bruiser 16 pricing?
Starting pricing varies by configuration. Use the pricing and availability form on this page and let us know whether you're interested in the tiller or center-console Bruiser. We can go over current pricing, available options, and build availability.
Build Your Bruiser
Choose the tiller or center-console configuration and tell us how you plan to use the boat. We'll help you determine the right setup, go over available options, and discuss current pricing and build availability.
Questions? Call 860-248-6725 or email us .
Bruiser 16
The Bruiser 16 adds a center console and rear bench seat to the sameindestructible HDPE hull as the Drifter. Built for commercial work,guides, and serious rec users who need more structure — and the comfortof console steering. Whether you’re outfitting a crew or covering milesin a day, the Bruiser 16 gives you that extra control withoutcompromising on toughness.
Specifications
Standard Features
Optional Upgrades
Outboard Motor (Gas)
Foam Decking
trolling motor
Trailer
Outboard Motor (Gas)
Foam Decking
trolling motor
Trailer
Outboard Motor (Gas)
Foam Decking
trolling motor
Trailer
Perfect For
- Guides, outfitters, and pros
- Utility and workboat applications
- Law enforcement, harbor patrol, government use
- Hunter, anglers and coastal users
- Contractors and fleet managers
